THERMOFLOC-blow-in insulation
Blow-in insulation for the manual infilling of the blow-in machines by means of bags at the construction site
For the manual infilling and installation we offer our clients the THERMOFLOC-blow-in insulation in 12,5 or 14 kg bags depending on the size and engine power of the used blow-in machine. Only trained installers are allowed to install the THERMOFLOC-blow-in insulation. Therefore the blow-in insulation is pumped under air pressure into the hollow spaces of the building components, where it is compressed in accordance with the material handling instructions to produce an uninterrupted and complete insulation layer that is open to diffusion.
Application possibilities for blown-in insulation
The near-natural THERMOFLOC fibers are used in building projects carried out in more than 21 European countries and the number of builders that are convinced about the many benefits of THERMOFLOC insulation systems is growing constantly. Basically, each construction component can be equipped with an injectable insulation. Compared to conventional insulation systems, it differs just in the sequence of the various working steps. We will be happy to advise you in all aspects concerning THERMOFLOC blown-in insulation!
THERMOFLOC blow-in insulation - all benefits at a glance
- Quick, reasonably priced, efficient
- Reduced energy costs
- Uninterrupted and vapor open insulation layer
- Overall airtightness of cracks, corners and cavities
- Comfortable living comfort in any season
- Available for any building component
Blow-in insulation for the fixed factory filling by means of big-bales
Combined with the factory filling system by x-floc, comprising a blowing panel, big bale conditioner and blowing machine, it is possible to factory-insulate timber frame elements optimally according to the processing guidelines.
Producteigenschappen:
| Benaming | THERMOFLOC F - inblaasisolatiemateriaal boraatvrij |
|---|---|
Benaming THERMOFLOC F - inblaasisolatiemateriaal boraatvrij samenstelling | Vezels van krantenpapier, additieven < 10% |
Toelatingen / certificaten | ETA-05/0186 natureplus 0107-1301-121-1 EPD-PSG-20210030-IBA1-DE CE-markering |
Gedrag bij brand (bij een inbouwdichtheid van 28 tot 60 kg/m³) | Klasse E / d ≥ 40 mm |
Gedrag bij brand (bij een inbouwdichtheid van 30 tot 60 kg/m³) | Klasse B-s2,d0 / d ≥ 100 mm |
Resistentie tegen schimmelgroei | Klasse 0 |
Geluidsabsorptie | ∝W=1,00 / d ≥ 100 mm |
Nominale waarde van de warmtegeleiding (bij een inbouwdichtheid van 28 tot 47 kg/m³) | λD(23,50) = 0,037 W/m·K |
Nominale waarde van de warmtegeleiding (bij een inbouwdichtheid van 48 tot 60 kg/m³) | λD(23,50) = 0,038 W/m·K |
Meetwaarde van de warmtegeleiding (bij een inbouwdichtheid van 28 tot 47 kg/m³) | λB = 0,039 W/m·K |
Meetwaarde van de warmtegeleiding (bij een inbouwdichtheid van 48 tot 60 kg/m³) | λB = 0,040 W/m·K |
Waterdampdiffusieweerstand | µ ≤ 1,4 |
Metaalcorrosie | Klasse CR |
Stelmaat | SV = 4,4 % / 28 kg/m³ Sd = 0 % / Klasse SC 0 / 48 kg/m³ |
Wateropname | WP = 8 kg/m² / 30 kg/m³ WP = 28 kg/m² / 60 kg/m³ |
Stromingsweerstand | ≥ 6,1 kPa·s/m² |
THERMOFLOC quality certificates
